Magne-free Clamp
For rationalization of plastic die casting mold replacement...
Die installation work is greatly speeded up
One-touch response to changes in the thickness of the mold base. In addition, since the block is magnetically attracted to the machine side, there is no need to worry about dropping the block when tightening the clamp, and the mold installation work can be done very easily and speedily.
If the specified spring is specified for the bolt part, the clamp will be held by the force of the spring even if the bolt is loosened a little when replacing the mold, and it will not fall even if it rotates vertically. Therefore, there is a space between the mold and the mold, and the mold can be replaced without attaching or detaching the clamp.
We recommend using springs for MFC 16-150 and above.
2 types to choose from
We have prepared a body that can be inserted and removed by just loosening the bolt (A type: insertion and removal type), and there is no need to worry about the body getting caught in the bolt and dropping it down (B type: hanger type) even if the bolt is loosened. Therefore, you can choose according to the worker's idea.